DIY Gold Dipped Glassware
by Erica in D.I.Y.
You’ll need:
Rip off a 6 inch piece of tape. Center the tape over the base of the glassware, rubbing the bottom edge against the glass. Pull the sides up at a slight angle. As long as the bottom edge
is taped smoothly, it’s alright if the top edge of the tape ripples or folds.
Bring one side of the tape across the middle of the glass. Although the spray paint I used is non-
toxic, I tried to keep the outline far below the lip line.
Bring the other side of the tape across so the two pieces meet at a point. Tape on a ziplock or
plastic bag while still exposing the bottom edge of the tape.
Lightly spray multiple and even coats of paint onto the glass from a couple feet away. Be sure to
always spray paint outdoors in a well ventilated area. Allow to dry completely before removing the bag and tape.
Your gold plated champagne flutes are finished! Remember, these are not dishwasher safe and
should be hand washed only.
Cheers!
I haven’t stopped thinking about Front‘s gold dipped glassware set ever since it circulated through the blogosphere last holiday season. So after recently spotting a tutorial on how to DIY gold dipped stemware, I was inspired to create my own version of these luxurious golden vessels. And of course, just in time for that New Year’s Eve party I’ll be hosting this year!
- non-toxic gold spray paint (I recommend Krylon)
- champagne flutes or wine glasses
- painters tape
- plastic or ziplock bag
is taped smoothly, it’s alright if the top edge of the tape ripples or folds.
toxic, I tried to keep the outline far below the lip line.
plastic bag while still exposing the bottom edge of the tape.
always spray paint outdoors in a well ventilated area. Allow to dry completely before removing the bag and tape.
should be hand washed only.
(top image from here, rest of images by HonestlyWTF)
sources:http://honestlywtf.com
